FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens driver for Windows 7 - FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens driv

FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens 1.01

FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens driver from Fujifilm for OS Independent

FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens driver from Fujifilm for OS Independent

Publisher review for FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens 1.01:

Before install FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens 1.01you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of FUJINON XF100-400mmF4.5-5.6 R LM OIS WR Lens . We recommend to always use most recent version of a driver.

Changes: - AF tracking performance on AF-C and Movie mode will be improved when they are attached to FUJIFILM X-Pro1 or X-E1.
Precautions: - If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
- Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 60 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Firmware Update Procedure: - Turn on the camera.
- Press "MENU/OK" button and select "FORMAT" in the SET-UP menu.
- Press the selector button(up) to select "OK" and press the "MENU/OK" button.
- Then, the format will start.
- Turn the camera off after the format is completed.
- Put the formatted memory card to a card reader slot of your PC.
- Download the firmware and copy it to the card.
- Take the card from the card reader slot after the copy is completed and put it to the camera.
- Turn the camera on pressing "DISP/BACK" button to show the display in the right. Then, press the "MENU/OK" button
- Select the item into [LENS] to update the XF lens.
- Press the [OK] button to go to next step.
- Press the [UP button] to select "OK".
- Press the [OK] button and wait.
- The firmware update has been successfully completed.
- Turn the camera off
- Check the upgraded firmware.
- Format the card.

Operating system:
OS Independent